Our LYRA Series industrial diesel generator sets are engineered to deliver high-capacity, reliable, and continuous power for the most demanding applications. Covering a wide power range up to 4000kVA, these generators are suitable for both prime power and standby power operations in environments where power continuity is critical.
Designed with heavy-duty diesel engines and industrial alternators, the generator sets provide stable voltage and frequency output, ensuring safe operation of sensitive equipment as well as high-inrush motor loads.
SPECIFICATIONS
ENGINE SPECIFICATIONS
- Heavy duty diesel engine
- 4 cycle, water cooled, turbocharged, air to air/air to water cooled
- Electronic or mechanic governor system
- 12/24 volt self-starter and charger alternator
- Changeable air, fuel and oil filter
- Flexible fuel pipe
- Oil discharge valve and extention pipe
- Industrial type silencer, exhaust spiral or compensator
- Maintenance free battery
- Engine block water heater (in automatic models)
ALTERNATOR SPECIFICATIONS
- Brushless, single bearing, flexible disc 4 poles alternator for
- harmonic failure
- H type isolation class
- IP 21-23 protection class
- Self exciter
- Electronic automatic voltage regulator
- Stator 2/3 step for harmonic failure
- The alternator windings are protected by insulating varnish against oil and acid
CANOPY
- Modular type sound-proof canopy
- Canopy installation executed with screw and nut, without welding
- process
- Epoxy and polyester powder painted canopy
- Weatherproof canopy rating is IP 23
- Canopy designed for easy maintenance
- Lockable doors on both sides of canopy
- Emergency stop button
- Transparent panel inspection window
- Insulation details: Non-flammeable acoustic foam
CONTAINER
- Chassis parts and load-bearing construction are manufactured
- from 140mm NPU
- The base metal sheet is manufactured from 2/3 diamond-shaped
- metal sheet
- Sidewall metal sheets are manufactured from 1.5mm ST 37 DKP
- trapezoidal metal sheet
- The top metal sheet will be manufactured from 1.5mm ST 37 DKP
- trapezoidal metal sheet
- Air disposing and suction parts are manufactured with the normal
- shutter in bolt-mounted hot-plug
- Lifting lugs are manufactured to bear the total load of the
- container (with generator)(8 pcs ISO Locked)
CONTAINER
- PPG RAL 9010 paint application is followed for painting
- Internal illumination has 2x1x18 Watt waterproof fixture and
- 1x1x16 A monophasic plug fitting
- Top wall isolation is 0.8mm galvanised perforated metal sheet
- Coating on 8cm fibro-glass glass wool plate
- The double-winged main door is manufactured with a pipe-type
- locking mechanism
- Service doors are manufactured with 4 single-winged and internal panic bar mechanisms to be locked outside (These doors aredesigned mounted inside the container body and doorknobs do not exceed container body)
- Emergency stop button on long edges
- Warning signs are placed to necessary places inside and outside the container
CONTAINER OPTIONS
- Standard container
- Acoustic container
SILENCER OPTIONS
- Standard industrial type
- Critical type
- Hospital type
SAFETY PROTECTION & ALARMS
- High water temperature
- Low oil pressure
- High & low engine speed
- Low radiator water level
- Over current load
- High & low genset voltage
- Start/stop failure
GENSET CONTROLLERS
- LCD display screen
- Hardware and materials needed
- Battery charger
- USB port & RS-485 output
OPTIONAL EQUIPMENTS
- Charge ammeter
- Moulded case circuit braker (in automatic models)
- Hospital/Critical type silencer
- Modular type sound-proof canopy
- Mobile – trailer
- Synchronization control panel for 2-16 gensets
- 3 pole/4 pole automatic transfer panel (A.T.S.)
- Fuel and oil heater
- Alternator heater
- Automatic fuel filling system
- Fuel-water seperator filter
- PMG warning system
QUALITY STANDARDS
Our generators compliance with VDE 0530, BSE 4999 BS5000, IEC 34, EN12601; EN60204-1; TS ISO 8528-1 … -13; EN12100-1; EN12100-2; EN61000-6-4; EN61000-6-2; EN61000-4-11; EN61000-4-6; EN61000-4-5; EN61000-4-2; EN55011; EN55016-2-1; EN55016-2-3; EN61000-3-2; EN61000-3-3; EN55014-1; EN61000-6-2; EN61000-4-3; EN61000-4-4; EN61000-4-8; EN61000-4-11; TS EN ISO 3744; TS EN ISO 3746; TS EN 60034-1; TS EN 60034-22; TS EN ISO 3046; BS 5514; NEMA MG 21; IEC 60034, BS 4999/5000 and TS EN 60947-1..4 standards.
Each generator set is built to operate reliably in industrial and harsh environmental conditions. Optimized cooling systems, reinforced mechanical structures, and carefully selected components ensure long service life and minimal downtime.
Optional configurations include extended fuel tanks, remote monitoring systems, low-temperature start kits, and custom enclosure solutions, allowing the generator to be tailored precisely to site requirements.
APPLICATIONS
- Manufacturing plants and heavy industry
- Data centers and mission-critical facilities
- Hospitals and healthcare infrastructure
- Oil & gas, mining, and energy projects
- Construction sites and large infrastructure works
- Utility backup and emergency power systems
With power ratings up to 4000 kVA, our diesel generator sets provide a scalable and dependable power solution for large-scale industrial operations. Designed for durability, efficiency, and performance, they ensure uninterrupted power where reliability is non-negotiable.
